Arisaka Offset Optic Mount Plate

Overview This is the Optic Plate ONLY. The Mount Base is sold separately. If you have an Arisaka Offset Optic Mount Base, you’ll need an optic plate to attach your optic. They come in Standard Height (1.5″-1.8″) and Tall Height (1.9″-2.2″). We recommend choosing a height that matches the height of the LPVO you’re running. So, if you have a scope with standard height rings, choose a standard height optic plate. This will help maintain a consistent cheek weld and head placement when rotating from behind an LPVO to the offset optic. What’s Included Plate 1 : Plate; Two screws for mounting plate to base; Four screws for mounting optic to plate. Plate 2 : Plate; Two screws for mounting plate to base. Plate 5 : Plate; Two screws for mounting plate to base; Four screws for mounting optic to plate. Plate 6 : Plate; Two screws for mounting plate to base. Plate 7 : Plate; Two screws for mounting plate to base; Four screws for mounting optic to plate. Plate 8 : Plate; Two screws for mounting plate to base. Plate 10 : Plate; Two screws for mounting plate to base; Two long screws for mounting optic to plate; 2.5mm Allen key. Plate 11 : Plate; Two screws for mounting plate to base; Four screws for mounting optic to plate. Plate 12 : Plate; Two screws for mounting plate to base. Specs Loctite 222 or 243 is recommended on all screws, which should be torqued to: Picatinny rail clamp – IP27 Torx Plus, 55 in/lbs. Optic base to stem M4x16mm – IP20 Torx Plus, 30 in/lbs. Optic plate to stem M4x10mm – IP20 Torx Plus, 30 in/lbs. Optic to optic plate – Refer to your optic’s manufacturer for correct torque values, not to exceed 20 in/lbs. Made in the USA. Installation Instructions