BCM MK2 Buffer System

Overview The BCM MK2 Buffer System is a significant improvement over your run-of-the-mill carbine system. The MK2 features a longer receiver extension and a longer buffer while utilizing a standard rifle-length action spring. But why does all that matter? It all starts at the longer 8-position receiver extension. This allows the use of a longer rifle-length action spring, which more evenly spreads the load over more coils and lets the system use more weight for the same amount of input, effectively widening the operating range of the entire system and making the rifle less sensitive to ammo choice, cleaning (or lack thereof), and environmental conditions. A longer buffer is used to compensate for the longer receiver extension; this provides room for an extra buffer weight, bringing the total up to four weights instead of the standard three found in a carbine buffer. This gives more adjustability, with BCM’s buffer weights ranging from 3.8oz (T0) to 7.4oz (T4). More weight not only slows the cycle of the gun and reduces recoil impulse, but it also delivers more chambering force and helps resist bolt bounce. The MK2 buffer also features an internal biasing spring, which ensures that the weights always sit towards the front face of the buffer, reducing noise and providing consistent carrier speed, aiding in more reliable chambering and extraction. The BCM MK2 is a semi-proprietary buffer system. It is not compatible with Mil-Spec Carbine buffers or Mil-Spec Carbine action springs. What’s Included 1x BCM MK2 Buffer T1 or T2 1x BCM MK2 Receiver Extension 1x BCM Rifle Length Action Spring 1x BCM QD Endplate 1x BCM Castle Nut Specs FEATURES Lessens felt recoil without compromising reliability Provides more consistent carrier velocity, which aids in reliability over conventional carbine buffer systems Increased internal counterweight travel reduces bolt bounce Internal spring to reduce the noise of the counterweight shifting and ensure more consistent weight placement Mil-Spec M16A4 rifle spring with more spring coils than M4 carbine increases consistency and widens the operating envelope of your rifle Buffer made of 7075-T6 aluminum, hard coat anodized for lasting endurance; comprised of Mil-Spec components Warranty: Covered by BCM’s manufacturer warranty. Warranty service is provided by BCM. BCM US Patent #10415907 Made in the USA. Technical Specifications Action Spring M16A4 (Rifle Length) Buffer Proprietary MK2 Buffer (VLTOR A5 Compatible) Buffer Weight T1: 4.7oz T2: 5.6oz Receiver Extension BCM MK2 – 8 Position Castle Nut BCM Mil-Spec End plate BCM QD