T.REX Offset Mount

Overview The T.REX offset mount is a minimalistic approach to mounting an offset optic on your rifle. Offsets provide a fast 1x aiming solution that is readily available by rotating the rifle in your shoulder. The offset optic also functions as a reliable backup optic platform. Each mount includes a riser plate, allowing users to run it higher than the standard height depending on your needs or primary optic setup. What’s Included Trijicon RMR Offset Mount 2x T25 rail clamp screws 1x Riser plate 2x Torx wrenches 4x T15 screws (2 short, 2 long) Leupold DeltaPoint Pro Offset Mount 1x Riser plate 2x T25 rail clamp screws 2x T20 screws 2x Torx wrenches Aimpoint Micro Offset Mount 1x Riser plate 1x Torx wrench 1x Hex wrench 2x T25 rail clamp screws 4x 2.5mm Hex screws (short) 4x 2.5mm Hex screws (long) Specs FEATURES 6061-T6 Aluminum construction Type III hard anodized coating Improved 35-degree angle for fast and natural aiming Low profile; only sits 0.14″ above the Picatinny rail An optional riser plate allows the end-user to roughly match the height of their primary optic for smoother transitions Made in the USA. Technical Specifications Rail Clamp Torque 30 in/lbs Optic/Riser to Mount Torque RMR : 12 in/lbs (dry) 10 in/lbs (wet) DeltaPoint Pro : 25 in/lbs (dry) 20 in/lbs (wet) Aimpoint Micro : 12 in/lbs (dry) 10 in/lbs (wet) Weight RMR : 1.8 oz (no riser) 2.4 oz (riser) DeltaPoint Pro : 1.6 oz (no riser) 2.2 oz (riser) Aimpoint Micro : 1.4 oz (no riser) 2.1 oz (riser) Rail Clamp Length 0.99 inches Height Over Rail 0.14 inches